Repetier

自 2011 年以来，我们一直是 3D 打印的狂热爱好者，并为 3D 打印机开发了多种软件解决方案。我们的第一台打印机是 RepRap Mendel。当时没有可用的软件，所以我们开始对 Repetier-Firmware 和 Repetier-Host 进行编程，以实现最佳的打印效果。后来添加了 Repetier-Server 以优化可能性并获得更大的灵活性。

Repetier 最初只是一种爱好，很快就变成了一份全职工作，但直到现在它仍然是一种爱好——只是一种全职爱好。因此，我们满怀热情地开发 Repetier 并不断改进。正是这种内在驱动力让我们在 3D 打印机社区中取得了成功，我们很自豪能够为 3D 打印机的炒作做出贡献。

Since 2011 we are absolute 3D printing enthusiasts and develop several software solutions for 3D printers. Our first printer was a RepRap Mendel. At that time no useful software was available, so we started to program Repetier-Firmware and Repetier-Host to achieve the best possible printing results. Later Repetier-Server was added to optimize the possibilities and get more flexibility.

Repetier started as a hobby and quickly became a full-time job, but until now it’s still a hobby – just a full-time hobby. For this reason, we develop Repetier with passion and continue improving. From this inner drive our success results in the 3D printer community and we are proud to have contributed a piece to the 3D printer hype.