Polyworx

Polyworx 开发并授权 RTM-Worx 流动模拟软件 树脂传递模塑和真空灌注。我们还实施了受控为我们的客户提供真空输液技术，包括现场培训。 我们的 RTM-Worx 软件可以在 PC 上进行实验 而不是在模具中，并且仍然非常准确。

Polyworx的主要业务是：

塑料软件工具的开发、许可和支持加工业。
关于注射优化的知识和技术转让一般过程，特别是受控真空灌注过程。

我们最重要的软件产品是 RTM-Worx，用于模拟树脂传递模塑和可控真空灌注工艺。实现的可控真空灌注工艺是我们目前最重要的服务。

RTM-Worx 软件
我们实现了非常快速、可靠、稳健和准确的组合有限元/控制体积 计算核心与以目标为中心的用户界面相结合。几何编辑器、预处理器和后处理器 和求解器是完全集成的。其结果是一个具有性能成本比的仿真工具 这是任何其他液体注射成型软件所无法比拟的，例如树脂灌注、树脂转移成型 （RTM）、VIP 和（受控）真空灌注 – 在市场上。使用该软件的成本是非常低，因为只需要最少的培训即可掌握软件，并且需要很少的支持。

咨询，可控真空输液
因为我们为新技术提供软件工具，所以了解以下知识非常重要 流程本身：这是我们支持的最重要组成部分。从那里开始，这是一个非常小的步骤为我们的客户实际实施该技术。这正是最近发生的事情可控真空灌注技术。目前，我们正在做几个项目，范围从扩展支持与（临时）许可证相结合，以实施该技术，其中包括传授必要的知识，测试材料，协助采购设备和材料， 制定输液策略和协调第一次输液。我们以项目为基础紧密工作与客户合作。如果客户获得 RTM-Worx（可选）的许可证，则培训是该项目的重点是将仿真结果转化为实践以及将允许客户在几个月内完成相当于实践的学习曲线通常（没有软件）需要数年时间才能获得。

使命
我们的主要目标是使尖端技术，特别是流动模拟软件和封闭成型技术，更易于获得。过程模拟软件应在接近生产时使用，以获得最大的收益 的好处。我们的服务是对软件的补充。我们与研究机构和大学合作，并几家公司在国际项目中保证连续性并进一步开发软件和加工技术。

Polyworx develops and licenses the RTM-Worx flow simulation software for Resin Transfer Moulding and Vacuum Infusion. We also implement Controlled Vacuum Infusion technology for our customers, including on-site training. Our RTM-Worx software makes it possible to do the experiments on the PC instead of in the mould and continues to be very accurate. 

The main activities of Polyworx are:

Development, licensing and support of software tools for the plastics processing industry.
Transfer of knowledge and technology about optimisation of injection processes in general and specifically the Controlled Vacuum Infusion process.
Our most important software product is RTM-Worx, for the simulation of the Resin Transfer Moulding and Controlled Vacuum Infusion processes. The implementation of the Controlled Vacuum Infusion process currently is our most important service. 

RTM-Worx Software
We have implemented a very fast, reliable, robust and accurate combined Finite Element / Control Volume calculation core in combination with a goal-centered user interface. Geometry editor, pre- and postprocessor and the solver are completely integrated. The result is a simulation tool with a performance to cost ratio that is not matched by any other software for Liquid Injection Moulding – e.g. Resin Infusion, Resin Transfer Moulding (RTM), VIP and (Controlled ) Vacuum Infusion – on the market. The cost of using the software is very low because only minimal training is needed to master the software and very little support is needed.

Consultancy, Controlled Vacuum Infusion
Because we provide software tools for new technologies, it is very important that we have knowledge of the process itself: it is the most important component of our support. From there, it is a very small step to actually implement the technology for our customers. This is exactly what recently happened with the Controlled Vacuum Infusion technology. Right now, we are doing several projects, which range from extended support in combination with a (temporary) license to the implementation of the technology which includes transfer of the necessary knowledge, testing of materials, assistance with acquisition of equipment and materials, developing the infusion strategy and coordination of the first infusion(s). We work on project basis in close cooperation with the customer. If the customer takes a license for RTM-Worx (optional), training is part of the project with the emphasis on translation of simulation results to practice and the methodology that will allow the customer to go through a learning curve in a few months equivalent to the practice that would normally (without the software) take years to acquire.

Mission Statement
Our primary goal is to make leading-edge technology, in particular the flow simulation software and closed moulding technologies, more accessible. Process simulation software should be used close to production to gain most of the benefits. Our services complement the software. We cooperate with Research Institutes and Universities and several companies in international projects to guarantee continuity and to further develop the software and the processing technology.